Steel Battalion
Controller Mod
By: AlphA
| RUMBLE |
I highly recommend reading the entire mod procedure before attempting.
|
REQUIREMENTS: • Steel Battalion controller (duh) • Spare Xbox controller • Wire (Small gauge around 5V rating.) • Wire cutters/strippers • Solder (rosin core recommended) • soldering iron (not soldering gun!) • electrical tape • 1k resistor • 100k resistor • 2N3904 NPN transistor • 741 Op-Amp IC • A few spare leads (can be taken from resistors) • Hot glue gun • Phillips screwdriver (long and narrow tip helps). • Some guts (courage) • IC level soldering skills • Some experience tinkering with electronics wouldn't hurt. |